I have had this setting for months it does not work for me. Whenever I want to connect my FR, I must first plug it in into the usb and then run the following script which someone once posted here or on the #openmoko irc. Until I run ths script I cannot ping and hence ssh into the FR. Unfortunately I don't know enough to integrate and automate what the script does into my interfaces file. If someone can shed some more light, it would be appreciated:
---------------------------------- #!/bin/sh # Enables Hostside USB-Networking for neo ifconfig usb0 down ifconfig usb0 192.168.0.200 netmask 255.255.255.0 up iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24 echo 1 > /proc/sys/net/ipv4/ip_forward iptables -P FORWARD ACCEPT route add -host 192.168.0.202 gw 192.168.0.200 route -n | grep -e "Destination" -e "usb0" ---------------------------------- cheers Denis On Thu, Nov 6, 2008 at 7:13 AM, joezeewails <[EMAIL PROTECTED]> wrote: > > Stefan Monnier wrote: > > > > That's probably not right. You probably want to try "allow-hotplug > > ubs0" instead. "auto" means to do it at boot time and it may just fail > > if (for some reason) the usb0 interface is not yet created. > > > > > > Stefan > > > I could confirm this. > It doesn't work with "auto usb0" with "allow-hotplug usb0" it works just > fine. > Every time I plug the Freerunner in my debian etch it brings the > interface up. > I use the version from the wiki with a extra freerunner script. > > My entry in /etc/network/interfaces: > > #freerunner > allow-hotplug usb0 > iface usb0 inet static > address 192.168.0.200 > netmask 255.255.255.0 > post-up /etc/network/freerunner start > pre-down /etc/network/freerunner stop > > > > Someone should correct the wiki, should I? > > > Cheers, > Joe > > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community