On Wed, Nov 12, 2008 at 07:52:34PM +0100, Klaus Kurzmann wrote: > * Rui Miguel Silva Seabra <[EMAIL PROTECTED]> [081112 19:15]: > > On Wed, Nov 12, 2008 at 05:54:07PM +0000, Rui Miguel Silva Seabra wrote: > > > On Wed, Nov 12, 2008 at 05:48:47PM +0100, Michael 'Mickey' Lauer wrote: > > > > Am Wednesday 12 November 2008 17:21:42 schrieb Rui Miguel Silva Seabra: > > > > > > > Of course you are. Read the sample config @ > > > > > > > http://git.freesmartphone.org/?p=framework.git;a=blob;f=conf/example/fr > > > > > > >ameworkd.conf > > > > > > > > > > > > hmms... that is overriding "xset s off" then, I suppose. > > > > > > > > > > > > Thanks for the tip. > > > > > > > > > > I only used this section: > > > > > > > > > > [odeviced.idlenotifier] > > > > > # add inut nodes to ignore for idle activity > > > > > ignoreinput = 2,3,4 > > > > > # configure timeouts (in seconds) here. A value of 0 > > > > > # means 'never fall into this state' (except programatically) > > > > > idle = 10 > > > > > dim = 20 > > > > > idle_prelock = 12 > > > > > lock = 2 > > > > > suspend = 0 > > > > > > > > > > But it doesn't seem to do anything. > > > > > > > > > > When I do: > > > > > echo 2 > /sys/class/backlight/pcf50633-bl/brightness > > > > > > > > > > I can still slightly see the screen, but even after a reboot, if I let > > > > > frameworkd to do it's job, it gets to 0 > > > > > > > > Even with lock = 0 ? > > > > > > hms... I thought only "suspend = 0" would be needed since I'd prefer the > > > screen to auto lock. > > > > > > But if currently auto lock == "dim = 0" then I will see what "lock = 0" > > > results in and report back as soon as I know. > > > meh... same bad result :( > IIRC setting also idle_prelock = 0 did the trick for me
Thank you Klaus! It did the trick for me too. Of course WSoD needs to go away asap, but it's much better to have a light dim than the full brighness :) Rui -- Kallisti! Today is Sweetmorn, the 24th day of The Aftermath in the YOLD 3174 + No matter how much you do, you never do enough -- unknown + Whatever you do will be insignificant, | but it is very important that you do it -- Gandhi + So let's do it...? _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
