Hi, "Evgeny Karyakin" <[EMAIL PROTECTED]> writes: > 2008/11/24 Andy Green <[EMAIL PROTECTED]>: >> I'm not sure what's happening to you, but your dmesg traffic would be >> pretty normal if you were entering and then leaving U-Boot... the >> connection would indeed timeout (-110) when we leave U-Boot and load the >> kernel / crash or whatever. >> >> If you hold down the AUX / corner key when you power up, you should come >> up in NOR U-Boot with a menu on the LCM. If that's true, you should >> have 30s to do the DFU you want to do before it times out. > > Yes, I know that, but I'm unable to connect to the phone through > DFU protocol because Neo don't offer itself as a device supporting > DFU. I have Neo plugged in to desktop throught USB cable. AUX+POW > gives me NOR boot menu and at the same time Neo must be visible to > desktop as DFU-capable device within next 30 seconds, but it's not.
It might be a silly suggestion but please double-check the usb cable used, try to connect directly to the motherboard (avoid front-panel connectors and usb hubs). May be you should try another PC. By no means (as you have no dboard) you could have damaged the NOR bootloader by dfu-util. It should just work. The battery must be charged before the flashing (you can even use any full-charged Nokia battery). Try removing the battery for some time (to ensure clean boot), then boot directly into the NOR uBoot, connect to PC and try to flash. If it doesn't work, use another cable/usb port/pc. -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:[EMAIL PROTECTED] _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community