Has anyone had any joy installing Egenix mx base on openmoko? Specifically I need mxDateTime, but I'm not having any luck getting anything installed:
r...@om-gta02:~/egenix-mx-base-3.1.1# python setup.py install running install running build running mx_autoconf arm-angstrom-linux-gnueabi-gcc -march=armv4t -mtune=arm920t -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -fPIC -D_GNU_SOURCE=1 -I/usr/include -c _configtest.c -o _configtest.o arm-angstrom-linux-gnueabi-gcc: error trying to exec 'cc1': execvp: No such file or directory failure. removing: _configtest.c _configtest.o arm-angstrom-linux-gnueabi-gcc -march=armv4t -mtune=arm920t -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -fPIC -D_GNU_SOURCE=1 -I/usr/include/python2.5 -I/usr/include -c _configtest.c -o _configtest.o arm-angstrom-linux-gnueabi-gcc: error trying to exec 'cc1': execvp: No such file or directory failure. removing: _configtest.c _configtest.o macros to define: [('BAD_STATIC_FORWARD', '1')] macros to undefine: ['HAVE_STRPTIME'] running build_ext building extension "mx.DateTime.mxDateTime.mxDateTime" (required) building 'mx.DateTime.mxDateTime.mxDateTime' extension arm-angstrom-linux-gnueabi-gcc -march=armv4t -mtune=arm920t -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -fPIC -DUSE_FAST_GETCURRENTTIME -DBAD_STATIC_FORWARD=1 -UHAVE_STRPTIME -Imx/DateTime/mxDateTime -I/usr/include/python2.5 -I/usr/include -c mx/DateTime/mxDateTime/mxDateTime.c -o build/temp.linux-armv4tl-2.5_ucs2/mx-DateTime-mxDateTime-mxDateTime/mx/DateTime/mxDateTime/mxDateTime.o arm-angstrom-linux-gnueabi-gcc: error trying to exec 'cc1': execvp: No such file or directory error: command 'arm-angstrom-linux-gnueabi-gcc' failed with exit status 1 r...@om-gta02:~/egenix-mx-base-3.1.1# Any pointers etc would be gratefully received. Thanks, Joseph _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community