Hello, Being new here I have to say sorry for my English!
My question is: I have been trying to flash the bootloader on my new FR, this is what I did: debian:/home/jos/neo# ./dfu-util -a u-boot -R -D qi-s3c2442-master_2ad3ce6ff57753e3.udfu dfu-util - (C) 2007 by OpenMoko Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY Opening USB Device 0x0000:0x0000... Claiming USB DFU Runtime Interface... Determining device status: state = appIDLE, status = 0 Device really in Runtime Mode, send DFU detach request... Resetting USB... Opening USB Device... Found Runtime: [0x1d50:0x5119] devnum=34, cfg=0, intf=0, alt=1, name="u-boot" Claiming USB DFU Interface... Setting Alternate Setting ... Determining device status: state = dfuIDLE, status = 0 dfuIDLE, continuing Transfer Size = 0x1000 bytes_per_hash=540 Starting download: [##################################################] finished! state(2) = dfuIDLE, status(0) = No error condition is present Done! Resetting USB to switch back to runtime mode debian:/home/jos/neo# Looks good !? After power down (battery taken out) restarting with aux and power button I get the same screen with menu as before, is this correct? How can I see that Qi now is beeing used (and not uboot?) Thanks and greetings, Jos vd Snepscheut _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
