I'll have to look through the community mails then. I have seen people referring to optimization problems. Perhaps I'm running into some questionable s/w. For now, my requirements were to only show a mobile phone registering with the s/w PBX. Voice was not part of the initial requirements. However, for demonstration purposes I would really like to have it working.
Thanks for you confirmation Al, it gives me a start if I have to work on this problem. Cheers!! On Fri, Dec 19, 2008 at 10:25 AM, Al Johnson <openm...@mazikeen.demon.co.uk> wrote: > On Friday 19 December 2008, john dowd wrote: >> I have a Neo freerunner running the 2008.9 load. I have it configured >> to connect using Wifi to my access point using WPA2 encryption. I do >> NOT have a SIMM card in my phone. >> >> I have managed to make a connection to the PBX sitting on the other >> side of the Access Point. However, the audio that I'm getting is so >> badly broken that it's incomprehensible. I have seen the CPU >> utilization going to 78% using top (not a good way to measure I know). >> >> What I'm wondering is, does the Neo have the horsepower to be able to >> do this? Is this just an optimization problem that can be addressed or >> am I pushing the phone beyond it's ability. >> >> Cheers!! > > I have made SIP calls using the linphone CLI over wifi with WPA-TKIP and the > audio quality was fine. I don't recall which codec it was using, but the > Freerunner is certainly capable of making high quality SIP calls over > encrypted wifi. > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > -- John Dowd jd...@slashdevslashnull.org 133 Waverley St. Ottawa Ont. K2P 0V3 Home: (613)234-7884 Cell: (613)316-7884 _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community