xiangfu wrote: > Hi > > Fox Mulder wrote: >> Today i changed from u-boot to qi from [1] for my GTA02. I added /boot >> to my rootfs and copied the kernel as uImage-GTA02.bin in it. >> For my first try i added the append-GTA02 with "console=tty0 loglevel=8" >> to see if it works. >> After this worked very good to boot debian from my sd-card i removed the >> append-GTA02 file to speed up the boot process a bit. But now i have two >> lines of output which irritates me a bit. >> >> ----- >> s3c2410_udc: debugfs dir creation failed -19 >> power_supply bat: driver faild to report 'status' properly >> ----- >> >> After ~30 seconds X starts and everything goes on as expected. >> Therefore i think this message is no problem, but i want to know if i >> had made something wrong? >> >> Also interesting is that the message says "s3c2410" even that i flashed >> the "s3c2442" version for GTA02. >> >> And another thing is that i don't know how to switch to nand booting >> when powerup my freerunner. At the moment i only use debian from >> sd-card, but for testing purpose i have 2008.12 installed on nand. But >> now with qi i can't boot from nand as long as i have my sd-card put it. >> I think i read somewhere that it is possible to skip a boot partition in >> qi but i can't find it anymore. :/ >>From Qi README Line 107: > > - You can disable a partition for boot by creating > /boot/noboot-<devicename>, > eg, /boot/noboot-GTA02, it will skip it and check the next partition
That's right, but i don't want to disable the partition by a file just to boot another partition. ;) I want to do it on the fly while starting as described with the AUX button. I only have to test it a bit further to get it to work with this button. Ciao, Rainer _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community