On Mon, 2009-02-02 at 13:33 +0100, joa...@verona.se wrote: > John Mandereau <john.mander...@gmail.com> writes: > > > joa...@verona.se a écrit : > >> usb 4-1: new full speed USB device using uhci_hcd and address 79 > >> usb 4-1: device descriptor read/64, error -71 > >> usb 4-1: device descriptor read/64, error -71 > >> usb 4-1: new full speed USB device using uhci_hcd and address 80 > >> usb 4-1: device descriptor read/64, error -71 > >> usb 4-1: device descriptor read/64, error -71 > >> usb 4-1: new full speed USB device using uhci_hcd and address 81 > >> usb 4-1: device not accepting address 81, error -71 > >> usb 4-1: new full speed USB device using uhci_hcd and address 82 > >> usb 4-1: device not accepting address 82, error -71 > >> hub 4-0:1.0: unable to enumerate USB device on port 1 > >>
I had this happen last week, seemed to occur when it was completely dead, plugged into the wall, gained some charge and then auto-booted. The only remedy was to reboot the FR, then it worked fine. (FYI - I'm running Debian with Qi). ...cj _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
