Am Saturday 21 February 2009 14:23:46 schrieb Timo Juhani Lindfors: > Marcel <[email protected]> writes: > > I installed kernel 2.6.28-20090105.git69b2aa26 (.28 kernel from Debian > > repo) yesterday. Today, wanting to use the neo as a webradio receiver > > connected to the stereo, I noticed that eth0, the wlan device, is gone. > > (No it doesn't have another name, ifconfig -a only shows up usb0 and lo.) > > Can you try > > echo 1 | sudo tee $sys_pm_wlan/power_on > echo s3c2440-sdi | sudo tee $sys_wlan_driver/unbind 2> /dev/null > > /dev/null echo s3c2440-sdi | sudo tee $sys_wlan_driver/bind > > where the variables are > > $ grep wlan .sysfsrc > export sys_pm_wlan=/sys/bus/platform/drivers/gta02-pm-wlan/gta02-pm-wlan.0 > export sys_wlan_driver=/sys/bus/platform/drivers/s3c2440-sdi > > ?
Argh. A week or so I always wondered why the wlan chip gets turned on automatically after each suspend. Now it does not anymore. Result: Wlan chip is turned off, therefore no wlan device. Dammit. Timo, you saved me once again, thanks! :) > > I have no idea where to check next, there seems to be really wrong > > with /proc/bus/pci (which comes from where?). > > There's no PCI in freerunner. That explains the issue... :) -- Marcel _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
