2009/2/23 Steve 'dillo Okay <[email protected]>: > r...@om-gta02:/usr/sbin# echo 0 >/sys/bus/platform/devices/neo1973-pm- > gsm.0/power_on > r...@om-gta02:/usr/sbin# echo 1 >/sys/bus/platform/devices/neo1973-pm- > gsm.0/power_on > r...@om-gta02:/usr/sbin# echo "a...@poff" >/dev/ttySAC0 > r...@om-gta02:/usr/sbin# FLUID_PORT=/dev/ttySAC0 fluid.exe -oo -b > 115200 -f /home/root/gsm_ac_gp_fd_pu_em_cph_ > ds_vc_cal35_ri_36_amd8_ts0-moko10.m0 > FLUID Revision 2.27, (23 Aug 2004). Copyright Texas Instruments, > 2001-2004. > Reading image file: '/home/root/ > gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko10.m0' (2138kB) ok > Bootloader: (reset target) > > Help ? > How long should I wait for the Bootloader to respond to the "s3c24xx- > gpio b7=1" command ?
Hi Steve, after you see Bootloader: (reset target) you have to do r...@om-gta02:~# s3c24xx-gpio b7=1 in the second session. This worked for me with moko11-b1 :) Best Peter _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
