"Steve \" 'dillo\" Okay" <[email protected]> writes: > Okay, I am pretty stuck here. > I've tried the procedure on the Wiki here: > http://wiki.openmoko.org/wiki/GSM/Flashing > and here: > http://lists.openmoko.org/nabble.html#nabble-td1565196|a1566012 > > to no effect. > > I run the fluid command and it just sits there at: > Bootloader: (reset target) > > In the other terminal window, I'm repeatedly doing > echo 0 >/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on > echo 1 >/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on > > to no effect.
I estimate the probability of this not working for the first time as 0.1. So, after the second try it will most certainly work. Are you sure nothing is accessing your modem at that time? Use lsof to check. Also, it's possible that your kernel version has power_on sysfs node in another place, make sure the node actually exists there. -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:[email protected] _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
