Here is the results of polling CFG PRT (0X06 0X00): (1) port #1 (id = 0x00)--> 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
(2) port #2 (id = 0x01)--> 0x01 0x00 0x00 0x00 0xd0 0x08 0x08 0x00 0x80 0x25 0x00 0x00 0x07 0x00 0x03 0x00 0x00 0x00 0x00 0x00 (3) port #3 (id = 0x02)--> 0x02 0x00 0x00 0x00 0xd0 0x08 0x08 0x00 0x00 0x96 0x00 0x00 0x07 0x00 0x03 0x00 0x00 0x00 0x00 0x00 (4) port #4 (id = 0x03)--> 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x03 0x00 0x03 0x00 0x00 0x00 0x00 0x00 Also, note that both NEMA and UBX binary are enabled on port #4 -- in and out protocols. GPS receiver continue sending messages to a port on which NEMA is enabled. Is this true when the port is not assigned a serial port device (say, /dev/ttySACx)? -- View this message in context: http://n2.nabble.com/GPS%3A-CFG-PRT%2C-port--3-is-enabled-by-default%2C-power-consumption--tp2418772p2418772.html Sent from the Openmoko Community mailing list archive at Nabble.com. _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
