Am Dienstag, den 17.03.2009, 00:13 +0100 schrieb Vinzenz Hersche: > it's very strange, i tried also with a actuall download of the testing-kernel > and testing lite-image and a new flash of both (so they should be new), but > it > also doesn't work.. > > r...@om-gta02 ~ $ cat /var/log/frameworkd.log | grep gps > 2009.03.16 23:06:48 frameworkd.controller INFO launching internal > subsystem ogpsd > 2009.03.16 23:06:48 frameworkd.subsystem INFO Scanned subsystem via > method > 'auto', result is ['om.py', 'gpsdevice.py', 'helpers.py', 'eten.pyo', > 'helpers.pyo', 'eten.py', 'ubx.pyo', 'gpschannel.pyo', 'gpschannel.py', > '__init__.py', 'nmea.py', 'om.pyo', 'factory.pyo', 'nmea.pyo', > '__init__.pyo','ubx.py', 'factory.py', 'gpsdevice.pyo'] > 2009.03.16 23:06:54 ogpsd WARNING (could not write to > '/sys/bus/platform/devices/neo1973-pm-gps.0/power_on': [Errno 2] No such file > or directory:'/sys/bus/platform/devices/neo1973-pm-gps.0/power_on') > 2009.03.16 23:06:54 ogpsd WARNING (could not write to > '/sys/bus/platform/devices/neo1973-pm-gps.0/power_on': [Errno 2] No such file > or directory:'/sys/bus/platform/devices/neo1973-pm-gps.0/power_on')
Looks good. FSO supports two kernel versions with two different sysfs paths, so one will always be missing. > 2009.03.16 23:06:54 frameworkd.persist ERROR no persist data for subsystem > ogpsd No problem, it will be generated next time. Daniel, should we turn this into an INFO rather than an ERROR? > 2009.03.16 23:06:55 ogspd.gpsdevice INFO GTA02Device initialized. Serving > org.freedesktop.Gypsy at /org/freedesktop/Gypsy > 2009.03.16 23:06:55 frameworkd.subsystem INFO subsystem ogpsd took 6.78 > seconds to startup It's successfully up. > 2009.03.16 23:08:37 ogspd.gpsdevice INFO disabling It's disabling the hardware to synchronize the hardware status with the logic status (power off by default). > 2009.03.16 23:08:37 ogpsd WARNING Attempted to send something while > serial > is not open. > 2009.03.16 23:08:37 ogpsd WARNING Attempted to send something while > serial > is not open. > 2009.03.16 23:08:37 ogpsd WARNING Attempted to send something while > serial > is not open. > 2009.03.16 23:08:37 ogpsd WARNING Attempted to send something while > serial > is not open. > 2009.03.16 23:08:37 ogpsd WARNING Attempted to send something while > serial > is not open. > 2009.03.16 23:08:37 ogpsd WARNING Attempted to send something while > serial > is not open. > 2009.03.16 23:08:37 ogpsd WARNING Attempted to send something while > serial > is not open. > 2009.03.16 23:08:37 ogpsd WARNING Attempted to send something while > serial > is not open. > 2009.03.16 23:08:38 ogpsd WARNING Attempted to send something while > serial > is not open. > 2009.03.16 23:08:38 ogpsd WARNING Attempted to send something while > serial > is not open. It's sending commands to shut it down, in case it was online previously (which we don't know on first start, since something else could have run before). > 2009.03.16 23:08:38 ogpsd WARNING (could not write to > '/sys/bus/platform/devices/neo1973-pm-gps.0/power_on': [Errno 2] No such file > or directory:'/sys/bus/platform/devices/neo1973-pm-gps.0/power_on') > 2009.03.16 23:09:09 ogspd.gpsdevice INFO enabling > 2009.03.16 23:09:09 ogpsd WARNING (could not write to > '/sys/bus/platform/devices/neo1973-pm-gps.0/power_on': [Errno 2] No such file > or directory:'/sys/bus/platform/devices/neo1973-pm-gps.0/power_on') > > same failure.. :( No failure -- see above. Device should be up and running now. _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
