On Mar 24, 2009, at 10:57 AM, mx li wrote: > i got a freerunner, first i download the two image: > Om2008.12-om-gta02.uImage.bin > Om2008.12-om-gta02.rootfs.jffs2 > use the dfu tools upgrade success. > > but i want to build the kernel image myself, so i do like this: > 1. > install git tools: apt-get install git > 2. > git clone git://git.openmoko.org/git/kernel.git linux-2.6 > 3. > cd linux-2.6 > git checkout origin/andy-tracking > 4. > cp arch/arm/configs/gta02-moredrivers-defconfig .config > 5. > download openmoko-i686-20080916-arm-linux-gnueabi-toolchain.tar.bz2 > from > http://downloads.openmoko.org/developer/toolchains/ > 6. > cd / > sudo tar jxf /openmoko-i686-20080916-arm-linux-gnueabi- > toolchain.tar.bz2 > 7. > cd linux-2.6 > mkdir GTA02 > cp arch/arm/configs/gta02-moredrivers-defconfig ./GTA02/.config > 8. > vi /usr/local/openmoko/arm/setup-env > modify line with : export LDFLAGS="-L${OMTOOL_DIR}/arm/arm-angstrom- > linux-gnueabi/lib -rpath-link ${OMTOOL_DIR}/arm/arm-angstrom-linux- > gnueabi/lib -O1" > 9. > . /usr/local/openmoko/arm/setup-env > 10. > cd linux-2.6/ > ./build GTA02 dummy > > after above, i use the dfu tools burn the uImage-GTA02.bin which > under GTA02 directory to freerunner, but it > stop at openmoko srceen, can't boot the system up, you should take a picture about the screen . :-)
what is your rootfs?? > > why? > > > _______________________________________________ > Openmoko community mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/community Xiangfu Best Regards _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
