On Wednesday 25 March 2009, Paul Fertser wrote: > > Problems: > > * I haven't got it to do sound yet - it seems unhappy with the alsa > > device capabilities. I don't know if this is a configuration issue or a > > fundamental problem. > > I guess you face the same issue with borked /etc/asound.conf as > others. It has dmix as the default device, and dmix obviously doesn't > support recording. Probably you can remove /etc/asound.conf altogether > or try to mimic configuration of any desktop distro. Or just configure > linphone to use hw:0,0 by default. > > Also, don't forget that a special voip.state should be loaded before > trying to input/output sound. It uses DAI mode 10 and arecord -D > hw:0,0 | aplay -D hw:0,0 is known to work.
I suspected as much, but couldn't confirm at the time. I had only given it a cursory check with the config that used to work for me with v1.6 and 2007.2. Now I can confirm it works using Brian Code's asound.conf and the voip- handset.state that comes with milestone5. Brian's config is available at: http://www.koolu.org/asound.conf _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
