Hi Tuan, I think our distributions differ to much to be of any more help. i am using om2008.12, you could try to run that of an sd card and see if it works that way. Aparently you do have a working data number on your phone, so that is a good thing. The hardware in the FR is capabale of making data calls, so that is a good thing too.
Good luck, and let us know your success/failures, we all can learn from it. Kind regards, Ed On Fri, 2009-03-27 at 13:11 +0700, Tuan TRINH wrote: > Hi Ed, > My answers are bellow. > > On Thu, Mar 26, 2009 at 5:56 PM, Ed Kapitein <e...@kapitein.org> wrote: > Hi Tuan, > > Strange that no connection is made to the landline modem. > you see no response, but dou you see the at commands echoed > back? > >>> When I make data calls, I see AT cmd echo back with OK --> modem > acepts cmd. > > if not use ate1 to see the responses. > >>> I always use ATE1 at fisrt. > > you can restart /usr/sbin/gsm0710muxd with the -v option and > use logread > to see what is send and received from the modem. > >>> Woop, I never see this process via ps. I use qtextend and before > doing things with socat I always shutdown qtextend so I can connect > to /dev/ttySA0. Do I need this before making data calls? Actually I > can make voice calls by ATs without this. > > If you use the motorola to call your FR, can you pick up the > call with > the ATA command? > >>> Can, after seeing RING, I use ATH to accept. > > Do you see a "ring" message? > > > Good luck ! > Ed > > > > On Thu, 2009-03-26 at 17:38 +0700, Tuan TRINH wrote: > > Hi Ed, > > Just try to initiate data call but no success. > > > > There is a strange symptom that is: If I use the same SIM > but on other > > mobile (Motorora Z8) I can hear the far end land-line modem > sound > > respone but if I use FR to call the same modem: (1) via AT > commands I > > see no response, both sound and response modem characters so > can not > > use expect(CONNECT) with ppp (2) via GUI, it drop the call. > > > > My FR can do voice call normally. > > > > Do you have any way to debug the status of data call while > using AT > > commands? I just know +CEER but it does not give much info. > > > > Cordially, > > Tuan ><SNIP>< > _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community