On Fri, Apr 17, 2009 at 11:53 AM, Sascha Gering <[email protected]> wrote:
> Hi Filip, > > Here is my output: > > > r...@muhko:~# cat /proc/cmdline > > loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro > > mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs) > g_ether.host_addr=00:1F:11:01:6D:2E g_ether.dev_addr=00:1F:11:01:6D:2E > rootfstype=jffs2 root=/dev/mtdblock6 > > > r...@muhko:~# cat /boot/append-GTA02 > > rw rootdelay=5 loglevel=1 quiet > > Hmm, why is there a "loglevel=4" in my cmdline, but "loglevel=1" in my > append file? > > Sascha > > Filip Onkelinx schrieb: > > Hi all, > > > > I know boot speed and resume speed is influenced by kernel boot > > parameters: the more kernel/debug messages displayed (on rather slow > > framebuffer), the slower the device will boot/resume. Might want to > > compare boot params (cat /proc/cmdline , look for loglevel= and console= > ) > > > > F. > The FSO boots very quickly (without qte), what I've found is that it takes a long time to launch qtextended. It seems to launch once, abort and then launch again. In the AtChat log output, I see that it tries different times to send a Ctrl-Z command to the modem, and only succeeds on the third time, which might explain the slow boot as well. Franky
_______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
