Hi! I'm running the 2008.12 on my Freerunner
I have agps http://www.opkg.org/package_127.html installed. I went on-line, downloaded the agps data first turning gpsd and the power on: /etc/init.d/gpsd start echo 1 >/sys/bus/platform/drivers/neo1973-pm-gps/neo1973-pm-gps.0/pwron /usr/bin/agps-onlinec ............. This works fine and it downloads me the data for around 13 satellites (tangogps shows this). Going outside and I get the fix in some seconds. OK, nothing new there. So I bike to this shop, suspend the phone, spend a while there and come out and wake the phone up. I waited a while, the GPS didn't seem to react, it told me it knows where ~13 satellites are but sees none. I have also gpsdcontrol (http://wiki.openmoko.org/wiki/Gpsdcontrol ) installed. I started it and the amount of known satellites changed from ~13 to 5 and some seconds later I got a fix. As far as I understand it only restarted gpsd. So the question is: do all apps work independently with the GPS data, there is no one place where the current signal/satellites is stored/something? And then they feed it to.. what? Or was tangogps or gpsd just stuck with the not-updating information that started to update again when I restarted gpsd? It'd be great if some bits of this could be improved to actually be able to save the location when suspending/turning gpsd off etc to be able to get a faster fix. r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community