try to add "rw" in the options of the append file, btw no need of fat partition if you are using Qi
2009/5/6 Laszlo KREKACS <laszlo.krekacs.l...@gmail.com>: > Hi! > > I installed SHR, but I also want to install om2009 (because of paroli), > and therefore I want to install om2009 on an sD card (shr is already in NAND). > > What I did: > > 1. Flashed Qi: > dfu-util -a u-boot -R -D qi-s3c2442-master-hist_3b8513d8b3d9615e.udfu > > 2. Partitioned sD card > first: 10MB fat > second: 500MB ext2 > > 3. Extracted paroli image over it: > (63MB, 20090501) > wget > http://downloads.openmoko.org/distro/testing/NeoFreerunner/fso-paroli-image-om-gta02.tar.gz > > 5. Made a symlink in /boot > uImage-GTA02.bin -> uImage-2.6.29-rc2 > > > 6. I made an append-GTA02 file > loglevel = 8 > > 4. Rebooted. > It stuck at booting. > Please wait: booting.... > s3c2440-sdi: Regulator for SD_3V3 unavible > > 5. Downloaded an uImage from here: > http://downloads.openmoko.org/distro/testing/NeoFreerunner/uImage-2.6.28-stable+gitr0+f19f259d3c1afde8eae53983fd19f61831927413-r2-om-gta02.bin > > 6. I copied over to /boot directory, and made a symlink > uImage-GTA02.bin which points to this file. > > I stuck at booting the same way. > > > What I miss? Must be something obvious. > OR the paroli image is broken? > > Best regards, > Laszlo > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > -- David Reyes Samblas Martinez http://www.tuxbrain.com Open ultraportable & embedded solutions Openmoko, Openpandora, Arduino Hey, watch out!!! There's a linux in your pocket!!! _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
