untar the image of http://wiki.openmoko.org/wiki/GSM/Flashing#uSD-card_Image and you'll know it... i'm quite sure 128MB will suffice the 512MB one, delivered with the FR surely will
On Sat, May 16, 2009 at 6:07 PM, Adam Jimerson <[email protected]> wrote: > How big of uSD card is needed to use the image to upgrade the GSM > Firmware? > > On May 16, 2009, at 4:56 AM, Paul Fertser wrote: > >> pike <[email protected]> writes: >>> The instructions on the Flashing page >>> http://wiki.openmoko.org/wiki/GSM/Flashing >>> sound very scary, and I am not inclined >>> to do that yet. >>> >>> Is upgrading the frimware required to >>> install 2009/testing ? My hardware has >>> been fine using QTExtended. >> >> Upgrading GSM gives you: compatibility with all SIM-cards (and don't >> forget that you might be forced to switch your working simcard to the >> one incompatible with moko8 when you'll have no time to think about >> GSM firmware), more robust resume on incoming call/message, proper >> flow control support (less risk of data loss and buffer overruns). >> >> Upgrading firmware is not scary at all, and is especially easy with >> the uSD image prepared by Joerg. >> >> I strongly recommend that (you can ask low-level devs but i'm sure >> they'll tell the same). >> >> -- >> Be free, use free (http://www.gnu.org/philosophy/free-sw.html) >> software! >> mailto:[email protected] >> >> _______________________________________________ >> Openmoko community mailing list >> [email protected] >> http://lists.openmoko.org/mailman/listinfo/community > > > _______________________________________________ > Openmoko community mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/community > _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
