Hmm. I just tried doing the setup on my FR's internal memory (rather than the SD card), using the suggested fso-image-nox-om-gta02.jffs2 image as a starting point.
The install worked, but after I successfully installed QT and rebooted, the usb networking refused to come up. I had to do a 'ifconfig usb0 up' and 'ifconfig usb0 192.168.0.202' from the terminal before I could log into it. Any ideas what might cause that and what I could do to fix it? I've tried rebooting again, and it didn't seem to make any difference... Warren On Fri, May 22, 2009 at 5:44 AM, Franky Van Liedekerke <[email protected]>wrote: > On Thu, 21 May 2009 16:52:18 -0400 > Warren Baird <[email protected]> wrote: > > > I've been running this build for about a week now, and am pretty > > happy with it. I installed it on my SD card on top of an OM2009 TR3 > > install. I don't know if that's an officially supported > > configuration, but it has seemed to mostly work. > > > > The only recurrent problem I've had is that it seems like my battery > > meter recently started always showing full - I've had the thing run > > out of battery a couple of times due to this. Now I have to go to > > the terminal and run apm if I want to know what my actual battery is. > > > > However, just in the last couple of hours I've seen a new failure > > mode - when someone calls my FR I see the standard call indication - > > but if I click answer, it doesn't actually answer the call - the > > caller continues to hear ringing and eventually goes to voice mail. > > > > The entries I see in logread starting when I get the call look like > > this: May 23 16:53:04 om-gta02 user.emerg kernel: [65512.070000] > > mapped channel 10 to 2 > > May 23 16:53:04 om-gta02 user.notice Qtopia: QAudioOutput: > > snd_pcm_sw_params: err -22 > > May 23 16:53:05 om-gta02 user.info kernel: [65513.845000] > > fbcon_event_notify action=12, data=c7a75dac > > May 23 16:53:05 om-gta02 user.info kernel: [65513.845000] jbt6k74 > > spi2.0: **** jbt6k74 unblank > > May 23 16:53:05 om-gta02 user.info kernel: [65513.870000] > > fbcon_event_notify action=9, data=c7a75de8 > > May 23 16:53:05 om-gta02 user.info kernel: [65513.870000] jbt6k74 > > spi2.0: **** jbt6k74 unblank > > May 23 16:53:26 om-gta02 user.info kernel: [65534.050000] > > fbcon_event_notify action=12, data=c7a75dac > > May 23 16:53:26 om-gta02 user.info kernel: [65534.050000] jbt6k74 > > spi2.0: **** jbt6k74 unblank > > May 23 16:53:26 om-gta02 user.info kernel: [65534.070000] > > fbcon_event_notify action=9, data=c7a75de8 > > May 23 16:53:26 om-gta02 user.info kernel: [65534.070000] jbt6k74 > > spi2.0: **** jbt6k74 unblank > > > > It's kinda annoying to not be able to answer calls... :-) > > > > I'm going to reboot and hope that fixes it. > > > > Is it possible this is because I started with the OM2009 TR image, > > and not the one recommended in the install script? > > > > Warren > > > > Hi, > > yes, this is very much possible, since the OM2009 TR image is a very > old kernel that has many bugs. > > Franky > > _______________________________________________ > Openmoko community mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/community > -- Warren Baird - Photographer and Digital Artist http://www.synergisticimages.ca
_______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
