On Tue, Jul 14, 2009 at 3:57 PM, Angus Ainslie <[email protected]> wrote:
> On July 14, 2009 07:15:13 am Previdi Roberto wrote: > > hello list. I updated my OM2009 installation (3-4 days old) with opkg > > update - opkg upgrade. After having accepted the new config files and > > rebooted the gsm service cannot start anymore. > > > > Please post /etc/frameworkd.conf and /etc/freesmartphone/oevents/rules.yaml > r...@om-gta02:~# cat /etc/frameworkd.conf [frameworkd] version = 1 log_level = INFO log_to = syslog [odeviced.audio] # set default alsa scenario default_scenario = stereoout # set path to alsa scenario files scenario_dir = /usr/share/openmoko/scenarios [odeviced.idlenotifier] # don't read from accellerometers for GTA02 ignoreinput=2,3 [odeviced.input] # don't read from accellerometers for GTA02 ignoreinput=2,3 # keys report1 = AUX,key,169,1 report2 = POWER,key,116,1 report3 = USB,key,356,0 report4 = HEADSET,switch,2,0 # disable accelerometer since it uses LOADS of CPU resources [odeviced.accelerometer] disable = 1 accelerometer_type = gta02 [ogsmd] # GTA02 has TI Calypso modemtype = ti_calypso ti_calypso_deep_sleep = never [ogpsd] device = GTA02Device channel = SerialChannel path = /dev/ttySAC1 [opreferencesd] rootdir = ../etc/freesmartphone/opreferences:/etc/freesmartphone/opreferences:/usr/etc/freesmartphone/opreferences [oeventsd] rules_file = ../etc/freesmartphone/oevents/rules.yaml:/etc/freesmartphone/oevents/rules.yaml:/usr/etc/freesmartphone/oevents/rules.yaml [opimd] disable = 1 [ousaged] disable = 1 [fsousage] [fsousage.controller] ----------------------------------------------------------------------------------------------------- r...@om-gta02:~# cat /etc/freesmartphone/oevents/rules.yaml # This file is in YAML format (http://www.yaml.org/) # We define a list of rules that will be automatically loaded # When we start the oevents module of the framework daemon # # The attributes of a rule are : # - trigger : trigger object # - filters : filters object or list of filters objects # - actions : action object or list of actions objects # # We define the following functions : # - CallStatus() : create a trigger object activated on a call status event # - PowerStatus() : create a trigger object activated on a power status event # - HasAttr(name, value) : create a filter that accept signal with a given attribute # - Not(filter) : create a neg filter # - PlaySound(file) : Action that starts to play an audio file # - StopSound(file) : Action that stop an audio file # - SetScenario(name) : Action that sets an audio scenario # - StartVibration # - StopVibration # - RingTone(cmd) : cmd can be 'start' or 'stop' # - Time(hour, min) : create a trigger activated at the given time # - Debug(msg) : Action that prints a debug message (only for debuging) - trigger: Time(12,29) actions: Debug("A Test") - # # Suspend Handling # trigger: InputEvent() filters: - HasAttr(switch, "POWER") - HasAttr(event, "released") - HasAttr(duration, 0) actions: Suspend() - # # Call -> Audio Scenario Handling # trigger: IncomingMessage() actions: MessageTone(play) - while: CallListContains("incoming") filters: Not(CallListContains("active")) actions: - RingTone() - SetDisplayBrightness("0", 90) - while: CallStatus() filters: Not(HasAttr(status, "release")) actions: - OccupyResource(CPU) - while: CallStatus() filters: - Or(HasAttr(status, "outgoing"), HasAttr(status, "active")) - Not(BTHeadsetIsConnected()) actions: - SetScenario(gsmhandset) - while: CallStatus() filters: - Or(HasAttr(status, "outgoing"), HasAttr(status, "active")) - BTHeadsetIsConnected() actions: - SetScenario(gsmbluetooth) - BTHeadsetPlaying() - while: PowerStatus() filters: HasAttr(status, "charging") actions: SetLed("gta02_power_orange", "light") #- # while: PowerStatus() # filters: Not(HasAttr(status, "discharging")) # actions: OccupyResource(Display) - while: PowerStatus() filters: HasAttr(status, "critical") actions: SetLed("gta02_power_orange", "blink") - while: PowerStatus() filters: HasAttr(status, "full") actions: SetLed("gta02_power_blue", "light") - trigger: PowerStatus() filters: HasAttr(status, "empty") actions: Command('poweroff') # # Headset Audio Scenario Support # - trigger: InputEvent() filters: - HasAttr(switch, "HEADSET") - HasAttr(event, "pressed") actions: Command('amixer -d sset "Amp Spk" mute') - trigger: InputEvent() filters: - HasAttr(switch, "HEADSET") - HasAttr(event, "released") actions: Command('amixer -d sset "Amp Spk" unmute') # # A few testing rules : # # This rule will only be enabled in silent mode # According to the preferences rules conf files. - name: 'test-rule' trigger: IdleState() filters: HasAttr(status, "busy") actions: Debug("Hello This is a test") - trigger: Test("test") actions: Debug("trigger test") - while: Test("test2") actions: RingTone() - trigger: DbusTrigger(system, 'org.freesmartphone.odeviced', 0, 'org.freesmartphone.Device.IdleNotifier', 'State') actions: Debug("dbus trigger test") - # # Idleness Brightness Handling # trigger: IdleState() filters: HasAttr(status, "busy") actions: SetDisplayBrightness("0", 90) - trigger: IdleState() filters: HasAttr(status, "idle_dim") actions: SetDisplayBrightness("0", 20) - trigger: IdleState() filters: HasAttr(status, "idle_prelock") actions: SetDisplayBrightness("0", 0) > > > For Om2009 it is best not to choose the package maintianers version of > those > files and keep the ones you have installed. > > Angus > > -- roby
_______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
