Hi folks. Ive got a problem to get running the proprietary Wifi driver under OpenMoko. I ported so far the basic WLAN driver to the modified kernel. I loaded it succesfully too. But Ive got a problem with getting it really running, because this TI-(Pseudobasic)-C writing habit confuses me and Ive trubble with modifing wlan_loader to get it running under OpenMoko. The problem looks like that:
r...@om-gta02:~#modprobe wlan r...@om-gta02:~#dmesg [ 8260.575561] TIWLAN: Driver loading [ 8260.575927] wifi_probe [ 8260.575958] trout_wifi_power: 1 [ 8260.781280] trout_wifi_reset: 0 [ 8260.832855] trout_wifi_set_carddetect: 1 [ 8260.832885] mmc0: card_present 1 [ 8260.832916] mmc0: Slot status change detected (0 -> 1) [ 8263.342529] mmc0: Command timeout [ 8263.349426] mmc0: card claims to support voltages below the defined range. These will be ignored. [ 8263.349517] mmc0: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored. [ 8263.352264] mmc0: new SDIO card at address 0001 [ 8263.353363] TIWLAN: Found SDIO controller (vendor 0x104c, device 0x9066) [ 8263.363128] tiwlan0 (): not using net_device_ops yet [ 8263.364471] TIWLAN: Driver initialized (rc 0) [ 8263.364837] TIWLAN: 1251 PG 1.2 [ 8263.364868] TIWLAN: Driver loaded r...@om-gta02:~# iwconfig lo no wireless extensions. dummy0 no wireless extensions. rmnet0 no wireless extensions. rmnet1 no wireless extensions. rmnet2 no wireless extensions. usb0 no wireless extensions. tiwlan0 no wireless extensions.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community