Alright....I figured out how to get intone to work with my bluetooth headset! I have to start a song, pause it and then start it again...but thats alright.
All my keys worked great (same key codes as other poster) Occasionally I have problems with the play/pause...but it doesnt look like mine is from the code being sent twice (intone doesnt report it twice anyway). It looks to me like the error occurs after I used the previous key, and then tried the play/pause key. When that happened intone gui shows on the play/pause toggle button a play button (when it should be a pause) and just keeps on playing the song. I got time outputs of: (not sure what these are...) time - 1248187227.222462 time - 3.214989 time - 115.908660 I occasionally get a message from intone that says "Cannot stream to bluetooth!" and it cuts out and switches back to the internal speaker. I ran mplayer from the command line and saw that mplayer actually outputs: [AO_ALSA] Trying to reset soundcard. [AO_ALSA] Write error: Broken pipe 16.4% (or whatever percent of the song its on) I can make the pipe break pretty regularly when I touch the screen.......but if i dont touch anything it works fine... (it looks like this is alleviated some if I set mplayer's nice level lower...) Hope this helps! And thanks for the great work! It is already very usuable with my bluetooth headset! -Dan Staley ________________________________________ From: Dan Staley [dlst...@uky.edu] Sent: Tuesday, July 21, 2009 1:22 AM To: List for Openmoko community discussion Subject: Re: Intone 0.60 Almost Stable ;-) Okay, I paired my A2DP headset (Lubix UBHS-NC1 ...from woot a couple of weeks ago) And I can get mplayer from the command line to play music to the headset (Though I have to play once, ctrl-c, then play again to get it to work...it seems like the headset needs something to wake it up before it will accept the stream...and then after a bit of nothing streaming, it times back out and I have to do a fake run of mplayer again....) It sounds great though when its working! However, I cant figure out how to get it to play to the headset from intone. Is there something you have to pass it to go into bluetooth mode? I know my commands are getting recognized from the headset to the moko when I press them because the screen turns on....would love to help by submitting more codes! -Dan Staley On Mon, 2009-07-20 at 19:55 -0400, The Digital Pioneer wrote: > An offtopic question: > Do you have a recommendation for a good bluetooth headset? > (for music listening) > Better then using the headjack on the phone. > > Thank you in advance, > Laszlo > > I've got a Plantronics Voyager 855, it works pretty well. It can be > stereo for music, or mono for calls. > _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community