RANJAN <[email protected]> writes: > Cool, thanks to the hint of Johan Hedberg from BlueZ project i finally > got it fully working. [1] Enjoy, improve and share. > > So shall I install bluez4 ,bluez-utils and bluez-hcidump?
Basically, you need only bluez4. bluez-hcidump is needed only if you're going to do some sophisticated debugging. You don't need bluez-utils at all, that's obsolete bluez3 stuff. As to the step-by-step howto, sorry, I thought i gave enough information on the wiki. It gives all the knowledge you need to setup bluetooth per se, if you lack knowledge about general networking stuff (bridges, routers, iptables, dhcp etc) then you need to learn it separately since after you have bluetooth connected it's no different to plugging ethernet in your laptop, you're free to do any reasonable configuration with it. -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:[email protected] _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
