Paul Fertser schrieb: > Vasco Névoa <[email protected]> writes: > >> I've been following this discussion from a distance, not paying much >> attention, but I'd like to warn that this fix is better done by >> replacing the original capacitor. >> > > Yes, with the one with low ESR, so one most probably will have to use > a ceramic. > > >> One should avoid putting wires inside an RF can, especially if they >> run towards the outside of the can. It ruins the can shielding >> purpose... >> > > Probably yes, probably not. Depends on luck and black magic. But > you're right, if routing anything outside the shield can be avoided, > it should be. Or at least some small nice ferrite should be placed on > the fire as near to the can as possible. > > Thanks! > > Jup thats right it depends mostly on luck. i just gave it a shot and it works flawlessly, if it had not worked i could have simply unsolered it.
i did not take a close look at the schematic but i would guess this c1009 acts a s buffer for modem power supply, right?! _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
