Note: it works fine manually. It still doesn't work from the GUI or with the lan-network script.
On Thu, Sep 24, 2009 at 9:38 PM, Torfinn Ingolfsen <tin...@gmail.com> wrote: > I did another test with wpa_supplicant manually. > This time, I looked more closely at the output, and noticed it said > "authentication timeout". Duh! > I checked my passphrase in wpa_supplicant.conf - one characyter had the > wrong case. > > It works now: > neo:~# ifconfig eth0 > eth0 Link encap:Ethernet HWaddr 00:12:cf:8e:e4:11 > inet addr:10.1.161.6 Bcast:10.1.255.255 Mask:255.255.0.0 > inet6 addr: fe80::212:cfff:fe8e:e411/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:743 errors:0 dropped:0 overruns:0 frame:0 > TX packets:193 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:571745 (558.3 KiB) TX bytes:17229 (16.8 KiB) > > neo:~# iwconfig eth0 > eth0 AR6000 802.11g ESSID:"kg4" > Mode:Managed Frequency:2.417 GHz Access Point: > 00:0F:66:51:AA:41 > Bit Rate=48 Mb/s Tx-Power=15 dBm Sensitivity=0/3 > Retry:on > Encryption key:off > Power Management:off > Link Quality:194/94 Signal level:-157 dBm Noise level:-96 dBm > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > Tx excessive retries:7 Invalid misc:0 Missed beacon:0 > > > Sorry for all the noise. > -- > Regards, > Torfinn Ingolfsen > -- mvh Torfinn
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
