On Monday 05 October 2009, Joseph Reeves wrote: > >This is probably worth checking to see what is actually happening > > when in Europe, > > Someone tell me what command to run on what distro and I'll let you all > know...
If it was going to be that easy I'd have done it myself ;-) AFAIK there isn't a simple ubx utility that would allow us to send parameters to the GPS and watch for the returning messages, so adding a few lines to ogpsd is probably the easiest approach. For anyone who knows their way around ogpsd and ubx it should be quick and easy ;-) I'm not that person, so if I get round to it it may take a little longer... > 2009/10/5 Al Johnson <openm...@mazikeen.demon.co.uk>: > > On Sunday 04 October 2009, Erik Lundin wrote: > >> Good news, indeed. Does the Neo FreeRunner support EGNOS signals? Both > >> the hardware and software? > > > > http://www.u-blox.com/en/download-center.html?task=view.download&cid=83 > > > > According to this the Antaris 4 is capable of using WAAS, EGNOS and MSAS, > > collectively known as SBAS, and the signal is received through the GPS > > antenna. By default it is enabled, with one search channel, although this > > can be configured through the ubx protocol. The status can also be shown > > in ubx messages. This is probably worth checking to see what is actually > > happening when in Europe, as when it was written EGNOS was in test mode, > > and its use was disabled by default. It is unclear whether this was > > because of a 'test mode' flag in the signal or hardcoding in the > > firmware. > > > > _______________________________________________ > > Openmoko community mailing list > > community@lists.openmoko.org > > http://lists.openmoko.org/mailman/listinfo/community > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community