A.A. wrote: > thx, where can I found compiled modules and uImage.bin? I do it like this:
make CROSS_COMPILE=/opt/toolchains/arm920t-eabi/bin/arm-angstrom-linux-gnueabi- ARCH=arm /opt/toolchains/arm920t-eabi/bin/arm-angstrom-linux-gnueabi-objcopy -O binary -R .note -R .comment -S arch/arm/boot/compressed/vmlinux linux.bin mkimage -A arm -O linux -T kernel -C none -a 30008000 -e 30008000 -n "NameOfYourImage" -d linux.bin uImage-GTA02.bin You will use different toolchain, so replace the path. For modules you can do: make CROSS_COMPILE=/opt/toolchains/arm920t-eabi/bin/arm-angstrom-linux-gnueabi- ARCH=arm modules_install (you might have to create directory /lib/modules/2.6.31 with read/write access first). Regards Radek _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community