At 5:40 +0100 23/12/09, Glenn wrote: >At 23:19 +0100 22/12/09, Sebastian Spaeth wrote: >>On 12/22/09 21:14, Vaudano Luca wrote: >>> Thanks for the new testing image! >>> >>> I tried to follow the suggested steps for enabling my swap >>> http://trac.shr-project.org/trac/wiki/swap#Createaswapfile >>> but I had some blocking problem. >>> >>> The first time I arrived at the point 3 then the console freezed and >>> my fr went to the kernel panic (red light on the aux button) >>> So I restarted my phone and I made the point 4 and 5. I rebooted and >>> the phone was stuck in the console. >>> Therefore I decided to reflash the new image. With the fresh image I >>> remade the process from 1 to 5, except 3, >>> then I rebooted and again the phone stucks in the console. >> >>Sorry no. I created my swap file using these steps, and it worked like a >>charm. (Actually I haven't modified my /etc/fstab, and only turn on swap >>when I opkg upgrade, so I can't guarantee that this is the absolutely >>correct thing) >>But steps 1-3 should work without a glitch. I would be interested in >>other users feedback if it worked for them. >>Anyway a kernel oops is bad in any case and should be debugged. However >>that is beyond my capabilities. >> >>spaetz >>_______________________________________________ >>Shr-User mailing list >>[email protected] >>http://lists.shr-project.org/mailman/listinfo/shr-user
Forgot some words: >Hi! > >For your information, I have used swap-file (384MB): >* 2 times with booting [and upgrading] from microSDHC partition. >* 2 times with booting [and upgrading] from NAND-flash partition. > >The first upgrade failed, because I forgot to use GNU screen in the >upgrade proces, I did tap the FR screen to prevent sleep every time >it went dark. > >Glenn _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
