Denis Johnson wrote:
> On Tue, Jan 19, 2010 at 9:23 AM, Brolin Empey<[email protected]> wrote:
>> I think you mean this post:>
>> <http://lists.openmoko.org/pipermail/community/2009-October/057319.html>
>
> Indeed that is the one I was referring to, thanks. I also found this one
> http://lists.openmoko.org/pipermail/community/2009-December/058189.html
Interesting, but I use only QtMoko, not SHR.
>
>> Please see my reply to Vinzenz Hersche’s post in this thread.
>
> Yes thanks, although your suggestion of putting control 48 to max of 3
> seems to contradict
> "48. The advice on the wiki is bad, and likely to lead to
> distortion. Keep 48
> low unless you have 12 and 5 near maximum."
I /do/ have 12 and 5 near maximum:
control.12 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 7'
iface MIXER
name 'Mono Sidetone Playback Volume'
value 6
}
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 127'
iface MIXER
name 'Mono Playback Volume'
value 110
}
>
> do you happen to know if we need to restart QTExtended or will changes
> to the state file take immediate effect.
IIRC, QtEI must be restarted.
>
> I also wonder how the QTMoko settings, call options, call volume
> interacts with these state files as it does not modify them if you
> change one or both sliders.
I do not know.
_______________________________________________
Openmoko community mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/community
