Hello dear folks, I'm struggling with getting online running v19.
In the past (and on othre distros) safest way seemed to be net-via-usb. Following the instructions at http://wiki.openmoko.org/wiki/USB_Networking#For_devices_showing_as_usb0 I set up on a Debian Sid host which identifies the device as usb0: # /etc/udev/rules.d/80-freerunner.rules KERNEL=="usb[0-9]*", DRIVERS=="cdc_ether", ACTION=="add", RUN+="/usr/local/sbin/freerunner-usbusb-add.sh %k" ## # /usr/local/sbin/freerunner-usbusb-add.sh #!/bin/sh ( busNum=$( printf %.2d $( expr match "$1" "usb\([0-9]*\)") ) ip link set "$1" address de:8b:f4:79:0b:$busNum &> /dev/null iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24 echo 1 > /proc/sys/net/ipv4/ip_forward iptables -P FORWARD ACCEPT ) & exit 0 ## On executing freerunner-usbusb-add.sh I get the following error msg: Cannot find device "de:8b:f4:79:0b:00" The accurate bus-id extracted from /var/log/messages is de:8b:f4:79:0b:b1 I also tried replacing the 2d in the third line of freerunner-usbusb-add.sh with b1, leaving the whole $busNum variable out and supplying the complete bus-id with $busNum attached, but always end up with the above error message. Any ideas? Sadly I don't really know what this script does exactly. Second attempt: WiFi When trying to ifup eth0 I get a bunch of the following errors: ioctl[SIOCSIWENCODEEXT]: Operation not supported udhcpc sends a few discoveries but exits with "lease failed". When reproducing this for this message it worked out of the sudden and I got an IP and a gateway address. I couldn't ping anything out there, ifdowned and ifup again and am back to the prior problem again. I hope someone can make sense of any of the above, being able to get online for some additional packages, eg mplayer would be highly appreaciated and making this wonderful distribution amazing. (: Thanks a lot, renilgh _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
