I have been using the qi with 2+4+2 timing over the weekend, and noted two problems. (This with shr unstable and its 2.6.32 kernel.)
First, lots of WSODs. This required lots of suspending (or reboot) without seeing the screen. This is not always possible, so lots of battery removal. All this crashing caused some filesystem trouble. And then the second problem showed up. I got i/o errors reading from the sdcard. Sometimes, I didn't get tiles for tangogps or pictures for my contacts. Unmounting the sdcard and running fsck ought to fix this. But the fix was temporary. fsck would claim to fix some issues, and when I remounted the card, I had normal access to the files. But it was all in the page cache - it wasn't real. Reboot, and exactly the same errors came up again. fsck would give exactly the same messages while running. And things would work for a while, but another reboot would always bring the same problems back. It was as if writes to the sdcard failed - but failed silently. So the kernel didn't notice. But nothing actually got written, it just stayed in the page cache so everything seemed ok. I also had a lot of hangs - probably because I have swap on the sdcard. If swapping to the card silently fail, then surely there is trouble when the stuff is swapped back in. Do the sdcard and the glamo share a bus? Maybe glamo can handle a speed that the sdcard cannot? Helge Hafting _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community