Hi, I had this problem few months ago. You should flash u-boot to NAND by nandwrite and run "dynpart" and "dynenv set u-boot_env" in NAND u-boot console. see: http://wiki.openmoko.org/wiki/Nandwrite Then you can flash all partitions (including NAND u-boot) via dfu-util from running NAND u-boot.
2010/12/26 Ivan Matveev <imatvee...@nm.ru>: > Hi, > the issue described at > http://docs.openmoko.org/trac/ticket/2348 > is still there. > Tried with 2 versions of dfu-util > > dfu-util --intf 0 -l > dfu-util - (C) 2007 by OpenMoko Inc. > This program is Free Software and has ABSOLUTELY NO WARRANTY > > Found Runtime: [0x1d50:0x5119] devnum=53, cfg=0, intf=2, alt=0, > name="USB Device Firmware Upgrade" > ------------ > ./dfu-util --intf 0 -l > dfu-util - (C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko > Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY > > dfu-util does currently only support DFU version 1.0 > > Found Runtime: [0x1d50:0x5119] devnum=55, cfg=0, intf=2, alt=0, > name="USB Device Firmware Upgrade" > > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
