Just an interim report from the lab... We have updated the X-Loader to work on the GTA04 (has slightly different GPIOs compared to the Beagle Board). Sources can be found here [1].
And, there is a brand new video [2] showing the demo setup, the board, zooming on the PoP memory. Then, we switch on power and break into U-Boot console mode. There, we initialize the LED controller (TCA6507) and make the AUX and Power LEDs blink. Then, we initialize the LCD module and start a TSC2007 test that reads all ADC channels and draws bars into the framebuffer. Next steps we will work on: * show a boot splash * make Linux boot on this board (needs a patch in the I2C driver) * test more functions Regarding the early adopter program, it is still open and we may need more participants because there appears to be some (high) MOQ for memory chips. Nikolaus [1]: http://projects.goldelico.com/p/gta04-xloader/ [2]: http://www.youtube.com/watch?v=2DilQPjrSx4 _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
