On Wednesday, March 16, 2011 13:17:56, Radek Polak wrote: > On Tuesday 08 March 2011 22:29:22 Alfa21 wrote: > > > 2011-03-05@17:14 Alfa21 > > > > > 2011-03-05@12:42 Radek Polak > > > > > > > > * unable to connect wifi wpa2-psk > > > > > > > > Was is working in some older versions? It can be bug either in > > > > wpa_supplicatant or in qmoko wifi plugin that creates configuration for > > > > wpa_supplicant. Does it work when you setup wpa_supplicant from command > > > > line? I am trying to connect WPA2-psk here and it does not work too :( > > > > > > previously I had v31 and it was ok, but only on the first attempt and > > > then I needed to reboot (rebooted also because wifi didn't stop and > > > battery drain empty in few hours) the blue led in v31 did never turn on > > > while connected. > > > before v31 it was all ok... IIRC > > > > hi, > > I tried to manually configure the wifi link: > > as you can read below, seems to be something different with the wpa driver > > in v33... > > Hmm i just tested wpa2-psk here at work and it works (only the first connect > after reboot). But it can be of course different AP. You could try to enable > Networking category in Settings->Logging and send me full log. Or you could > try to replace wpa_supplicant with package from lenny. But I am not wifi > expert > so cant promise anything. > > Regards > > Radek >
hi radek, i'm sorry for the silence. i found the solution about this topic: 1) qtmoko doesn't kill wpa-supplicant closing wifi the first good time, this is bad! 2) because of previous point i messed too much and missconfigured my ap.. so i tried with wrong settings, ignore me: current supplicant is ok! 3) remains the problem of battery discharge when you disconnect from wifi:maybe interface doesn't go to sleep?btw i can force this by script (wifi off) regards! _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
