Thomas,
Radek set me up with access and I have put the files here:
http://qtmoko.sourceforge.net/download/x11vnc/
- sorry about the delay!
BTW, I put a README.txt file there too but that is not displaying for
some reason but shell script should give you enough info . .
Regards,
Phil.
On 2011-04-03 20:12, Thomas Bellembois wrote:
It would be great !
May be Radek could put it on the QTMoko site ?
Le 03/04/2011 12:07, Philip Rhoades a écrit :
Ranjit,
Keyboard access was what I paid Karl to do . . it is pretty basic with
a minor glitch . . but it works . .
If someone can tell me an appropriate place to put it for general
access, I will do that . .
Phil.
On 2011-04-03 18:04, Ranjit Pillai wrote:
Hi,
If you want to use x11vnc with qtmoko, remember that qtmoko runs on
framebuffer and not x11. I tried it with QX but couldn't make it work,
but with a simple cmd at the shell prompt
x11vnc -rawfb console ----> (device)
and
vncviewer<ip-address of server> -----> client(laptop) was able to
connect to the x11vnc, but don't expect the keyboard access or
anything of that sort.. :)
just recorded a sample video with it ... its with v24
http://www.youtube.com/watch?v=8N76Kfc9HmQ
Rgds
Rp
On 4/2/11, Philip Rhoades<p...@pricom.com.au> wrote:
Thomas,
I paid Karl to do a bit of work on it so what I have is probably a bit
different from what you have. Maybe I should put it and my startup
script on the OM web site somewhere?
Regards,
Phil.
On 2011-04-02 04:10, Thomas Bellembois wrote:
Thanks for this quick reply !
I could not manage to make it work.
I have apt-get installed it, configured xinetd to run it a startup
but I
can not connect with my vnc client.
Could you give me your method ?
Thanks a lot.
Thomas
Le 01/04/2011 17:40, Philip Rhoades a écrit :
Thomas,
Yep - using it constantly so I can get full keyboard access for
typing
texts . .
Karl was very helpful getting the glitches sorted out - I have one
trivial problem that I can't work out but Karl is quite busy at the
moment.
Regards,
Phil.
On 2011-04-02 00:59, Thomas Bellembois wrote:
Hello All !
I was wondering if somebody has already tried to use x11vnc on
QTMoko ?
(http://www.karlrunge.com/x11vnc/)
Thanks,
Thomas
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
--
Philip Rhoades
GPO Box 3411
Sydney NSW 2001
Australia
E-mail: p...@pricom.com.au
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
--
Philip Rhoades
GPO Box 3411
Sydney NSW 2001
Australia
E-mail: p...@pricom.com.au
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
