Thanks Timo. Timo Juhani Lindfors said: > 1) How about > > iptables -nvL > iptables -nvL -t nat > > on the PC?
eric@debian:~$ sudo iptables -nvL WARNING: All config files need .conf: /etc/modprobe.d/libpisock9, it will be ignored in a future release. Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination eric@debian:~$ sudo iptables -nvL -t nat Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination > 2) And /etc/resolv.conf on the phone? root@om-gta02 ~ # cat /etc/resolv.conf nameserver 208.67.222.222 nameserver 208.67.220.220 > 3) Try "ping -n 192.168.4.200" on the phone? root@om-gta02 ~ # ping -n 192.168.4.200 ping: invalid option -- 'n' BusyBox v1.18.4 (2011-05-19 22:07:46 CEST) multi-call binary. Usage: ping [OPTIONS] HOST Send ICMP ECHO_REQUEST packets to network hosts Options: -4,-6 Force IP or IPv6 name resolution -c CNT Send only CNT pings -s SIZE Send SIZE data bytes in packets (default:56) -I IFACE/IP Use interface or IP address as source -W SEC Seconds to wait for the first response (default:10) (after all -c CNT packets are sent) -w SEC Seconds until ping exits (default:infinite) (can exit earlier with -c CNT) -q Quiet, only displays output at start and when finished root@om-gta02 ~ # ping 192.168.4.200 PING 192.168.4.200 (192.168.4.200): 56 data bytes <tick tock> ^C --- 192.168.4.200 ping statistics --- 106 packets transmitted, 0 packets received, 100% packet loss oot@om-gta02 ~ # ping 192.168.0.200 PING 192.168.0.200 (192.168.0.200): 56 data bytes 64 bytes from 192.168.0.200: seq=0 ttl=64 time=0.000 ms 64 bytes from 192.168.0.200: seq=1 ttl=64 time=0.000 ms ^C _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community