whatever I do I only get the following from lsusb:
Bus 001 Device 005: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle 
(HCI mode)
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

I use a powered hub to connect to usb peripherals...
I used "echo host > /sys/devices/platform/s3c2410-ohci/usb_mode" ...

Just to be sure, here is the output from "usb-device" :
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=02.06
S:  Manufacturer=Linux 2.6.34-qtmoko ohci_hcd
S:  Product=S3C24XX OHCI
S:  SerialNumber=s3c24xx
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0a12 ProdID=0001 Rev=19.58
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

any help would be appreciated...
Openmoko community mailing list

Reply via email to