Hello,
I'm not experienced in UBIFS, anyway...
Hi, list
I have recently launched an shr-u update, and now it doesn't boot anymore. I
suspect the update downloads filled NAND, but I'm not sure.
I'm trying to mount partition from debian (on uSD):
debian-gta02:~# uname -a
Linux debian-gta02 2.6.29-20100313.git973a41fc #1 Sat Aug 7 17:45:57 GMT-3
2010 armv4tl GNU/Linux
debian-gta02:~# ubiattach /dev/mtd6 -m 6 -O 2048
ubiattach: error!: UBI is not present in the system
Following http://wiki.openmoko.org/wiki/UBIFS the command should be:
#ubiattach /dev/ubi_ctrl -O 2048 -m 6
followed by:
#mount -t ubifs ubi0:om-gta02-rootfs /media/om
debian-gta02:~# modprobe ubi
WARNING: All config files need .conf: /etc/modprobe.d/linux-sound-base_noOSS,
it will be ignored in a future release.
debian-gta02:~# ubiattach /dev/ubi_ctrl -m 6 -O 2048
UBI device number 0, total 1969 LEBs (250015744 bytes, 238.4 MiB), available 0
LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
debian-gta02:~# ubimkvol /dev/ubi0 -N rootfs -m
ubimkvol: error!: UBI device does not have free logical eraseblocks
Can anyone help me with this error?
Isn't possible to mount a full ubifs partition or am I doing something wrong?
Thanks
Regards,
Giacomo
--
##############################################################
giacomo 'giotti' mariani
gpg --keyserver pool.sks-keyservers.net --recv-key 0x99bfa859
O< ASCII ribbon campaign: stop HTML mail
www.asciiribbon.org
##############################################################
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
