Hello. On Sun, 2012-01-22 at 01:13, a dehqan wrote: > In The Name Of Allah > Hello > Thanks have tried: > mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata) > > Now printenv shows: > > mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata) > > but when want to try dfu-utils -l shows: > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=1, name="u-boot" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=2, > name="u-boot_env" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=3, name="kernel" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=4, name="splash"Hello.
On Sun, 2012-01-22 at 01:13, a dehqan wrote: > In The Name Of Allah > Hello > Thanks have tried: > mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata) > > Now printenv shows: > > mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata) > > but when want to try dfu-utils -l shows: > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=1, name="u-boot" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=2, > name="u-boot_env" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=3, name="kernel" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=4, name="splash" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=5, name="factory" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=6, name="system" > > again there is no userdata > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=5, name="factory" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=6, name="system" > > again there is no userdata On Mon, Jan 23, 2012 at 8:13 PM, Martin Jansa <martin.ja...@gmail.com>wrote: > On Mon, Jan 23, 2012 at 08:07:15PM +0330, a dehqan wrote: > > In The Name Of Allah > > Hello > > > > This is answer of stefan schimdt (dfu-utils developer) : > > > > "The number of shown partitions is hardcoded atm to DFU_NUM_ALTERNATES > > which is set to 6. So you last partition does not get shown increment > > it to seven in your board config and re-compile your u-boot and test > > again." > > Why not sqash factory+system partitions together as someone suggested in > this thread? > > Here: > > > >> setenv > > >> > mtdpartsmtdparts=physmap-flash:-(nor)\;neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x04040000(factory_system),0x0b6a0000(userdata) > > >> > > > Cheers, > > -- > Martin 'JaMa' Jansa jabber: martin.ja...@gmail.com > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > >
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community