Hi, After execution of Neil Brown's howto for GPRS on the GTA04, I would conclude as: +> For the connection to /dev/ttyHS3, I use minicom with the default settings but the connection does not work consistently. +> AT+CFUN = 3D1 (set phone functions on), and AT_OWANCALL=3D1,1,1 returns me "ERROR".
Here is my log: AT+COPS OK AT+COPS? + COPS: 0,0, "004f00720061006e0067006500200046", 0 OK AT_OWANCALL = 3D1,1,1 ERROR AT_OWANDATA? OK What are the tips for the connection débuger? Can you used the modem mode multiplexing (neocontrol) with a GTA04A4? The UMTS signal reception is good in my house. Best regards, Marc >>Neil Jerram <neil at ossau.homelinux.net> writes: >> Marc Langlois <langlois.marc at gmail.com> writes: >> >>> Neil, >>> >>> My phone is GTA04A4. >> >> Ah, thanks. Has GPRS actually been integrated yet in QtMoko on the >> GTA04? I'm not sure that it has. > >For ease of reference, here's Neil Brown's howto for GPRS on the GTA04 >(and which it's well worth creating another copy of): > >> 0/ connect to /dev/ttyHS3 (others might work) >> 1/ make sure you are registered with network. >> e.g. >> AT+CFUN=3D1 >> AT+COPS >> AT+COPS? >> >> 2/ establish data connection >> AT_OWANCALL=3D1,1,1 >> >> 3/ collect status >> >> AT_OWANDATA? >> My response was >> _OWANDATA: 1, 49.179.102.244, 0.0.0.0, 211.29.132.12, 61.88.88.88, 0.0.0= >> .0, 0.0.0.0,144000 >> ^IP address ^ ^DNS-1------^ ^DNS-2----^ >> >> 4/ configure network >> >> ifconfig hso0 49.179.102.244 up >> route add default dev hso0 >> >> echo nameserver 211.29.132.12 > /etc/resolv.conf >> echo nameserver 61.88.88.88 >> /etc/resolv.conf >> >> >> >> >> And you should be set to go. If you want tethering via USB then add: >> on GTA04: >> echo 1 > /proc/sys/net/ipv4/ip_forward=20 >> iptables -t nat -A POSTROUTING -s 192.168.0.200 -j MASQUERADE >> >> (here 192.168.0.200 is the IP of my notebook on the USB interface.) >> >> on notebook/desktop/whatever >> >> route add default gw 192.168.0.202 >> echo nameserver 211.29.132.12 > /etc/resolv.conf >> echo nameserver 61.88.88.88 >> /etc/resolv.conf >> >> (192.168.0.202 is IP of GTA04 of USB link). >> >> To terminate data call >> >> AT_OWANDATA=3D1,0,1 >> >> >> You don't need pppd at all. > >But there are no occurrences of "OWAN" in the qtmoko codebase - so I'm >pretty sure it hasn't been integrated yet. > > Neil _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community