Hi There is an annoying problem in QtMoko when you try to connect to a WPA protected network: the network manager fails to connect to the chosen network and/or loses manual IP settings. I don't remember if this issue was solved but I found a workaround by chance. I noticed that if there is only and only one network around you and if you manually sets your IP, then the connection successfully happens. Instead, when there are a lot of networks, the aforementioned issue occurs. This is the workaround I found: - scan for the networks - go to the network manager properties and select the second voice "Wireless Settings" - on top, there is a dropdown list of nearby networks, delete all of them but the network you want to connect to - go back and choose "IP settings" and set IP manually (this is mandatory) - go back to the network manager main page, open up the option menu and enable the connection.
I tested this "procedure" with QtMoko v55 and v56, only with two different networks, but it is the only way for me to have a working connection. IIRC there are no problems at all in connecting to open networks. Hope it could be useful. Ciao Joif _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
