On Thu, Dec 12, 2013 at 11:10 PM, Radek Polak <pson...@seznam.cz> wrote:
> On Friday, December 13, 2013 02:59:01 AM Ben Wong wrote:
>
>> What's the checksum supposed to be for the QTMoko files?
>
> a76072c1c9dce4eb2b07235f7cc307fe qtmoko-debian-gta02-v58.ubi
> 50baec96657802b5a053fa0ef6b777a2 uImage.bin-2.6.39-qtmoko-v58

Yup, that's what I'm getting.

> This is strange - it works for me.

Are you using dfu-util or dd to write to the NAND?

> Are you booting with qi-v58.udfu? Is the tarball ok at least?

I tried qi-v58 first then qi-v56 as a test. Neither worked. Haven't
tried the tarball; I don't have an SD card handy and (correct me if
I'm wrong) there's no way to unpack the tarball onto the NAND unless
you've already booted from SD.

I notice that v58's .ubi file is 101MiB. This is probably a
red-herring, but is there any known problem with crossing the 100MiB
threshold? [Oh wait, ignore that, I just checked and v54's .ubi was
142MiB.]

—B

_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

Reply via email to