Hi,
I have built a new debian image for Phosh (debootstrapped + letux-minimal +
purism-sources-list + letux-phosh):
http://download.goldelico.com/letux-debian-rootfs/?C=M;O=D
which can be installed (togehter with the letux-4.19.12 kernel) through
makesd phosh
or for a two-partition system like the Pyra or OpenPandora
makesd pyra-4gb -r phosh
(assuming the latest makesd: run "makesd -u" to be sure).
There is now a user "purism" with default password "123456" which should also
be the PIN for the initial unlocking screen.
This is of course not safe at all but good enough for initial experiments...
Phosh is still under heavy development and Debian/Buster is not yet stable
anyways.
Well, it boots but running phosh on the Pyra fails:
root@letux:~# phosh
2018-12-21 18:54:53 - [rootston/config.c:370] Configured output Virtual-1 with
mode [email protected]
2018-12-21 18:54:53 - [rootston/config.c:370] Configured output X11-1 with mode
[email protected]
2018-12-21 18:54:53 - [backend/session/logind.c:363] Failed to get seat id: No
data available
2018-12-21 18:54:53 - [backend/session/direct.c:159] Could not get current tty
number: Inappropriate ioctl for device
2018-12-21 18:54:53 - [backend/session/session.c:76] Failed to load session
backend
2018-12-21 18:54:53 - [backend/backend.c:250] Failed to start a DRM session
2018-12-21 18:54:53 - [rootston/main.c:26] could not start backend
root@letux:~# cat /etc/debian_version
buster/sid
root@letux:~# uname -a
Linux letux 4.19.12-letux+ #3090 SMP PREEMPT Mon Dec 24 13:47:00 CET 2018
armv7l GNU/Linux
root@letux:~#
There is only a (properly rotated!) login: with blinking cursor shown on the
display.
Trying the same on GTA04A4 has exactly the same error messages but the display
is even completely inactive.
So there is still a config issue and I have no idea what a "seat id" should
be...
BR,
Nikolaus
_______________________________________________
Community mailing list
[email protected]
http://lists.goldelico.com/mailman/listinfo.cgi/community
http://www.tinkerphones.org
