Hi Nikolaus, On Fri, 19 Apr 2019 08:06:29 +0200 H. Nikolaus Schaller <[email protected]> wrote:
> The first board did not boot and I was not able to make it boot by recovery > µSD cards. It did not even show the magic ID string on RS232 which means > the OMAP3 Boot ROM is not running (or RS232 is broken). This needs deeper > analysis and looked to be unrepairable. > If usb socket is ok, looking for the bootrom on usb might also be a check to quickly classify the board better. > The second one did show the ID, but also did not want to boot. Therefore, > I took a recovery µSD (makesd gta04 / makesd gta04a5) and with that one I > could boot a little, but with problems. Therefore, I did break into the U-Boot > console and did erase the MLO and NAND environment: > > nand erase 0 500000 > Ok, I should really create some letux-rescue.deb (for host side) to fix those problems via usb. I have most of the parts for it. Just need a step-by-step confirmation thing. so you press return for every step taken. Should keep one's nerves. Regards, Andreas _______________________________________________ Community mailing list [email protected] http://lists.goldelico.com/mailman/listinfo.cgi/community http://www.tinkerphones.org
