El Mon, Feb 03, 2020 at 07:24:22PM +0100, H. Nikolaus Schaller deia:
> Hi,
> finally, after bootstrapping my aarch64-linux-gnu (arm64) cross-toolchain
> and fixing minor issues I am able to compile our kernel tree for
> arm64 :)
>
> Using a pinephone_defconfig from
>
>
> https://gitlab.com/pine64-org/linux/blob/58a9a99b775d71c5b78f19da1a251788561d28cc/arch/arm64/configs/pinephone_defconfig
>
> and letux-5.5.1 I got an 248 MB vmimage.
>
> Next I have to find out which image compression is needed for the
> U-Boot and how to place it on the SD card and then try to boot.
>
I don't know about Allwinner, but what I remember about Pine Rockpro64
is that arm64 kernels can't decompress themselves. So uboot does that
after loading and before booting.
You can cp Image.gz to the card and in bootcmd decompress it with the uboot
command:
unzip $compressedKernImgAdr $uncompressedKernImgAdr
My notes are somethign like
export CROSS_COMPILE=aarch64-linux-gnu- ; export ARCH=arm64
make clean
make ${something}_defconfig
make -j 12 BL31=bl31.elf u-boot-dtb.bin spl/u-boot-spl.bin u-boot.itb
./tools/mkimage -n rk3399 -T rksd -d tpl/u-boot-tpl-dtb.bin out #this will be
different for allwinner, I guess
cp u-boot-rockchip/uEnv.txt /media/.../boot/
cp linux-5.2.11/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtb
/media/.../boot/rk3399-rockpro64.dtb
cp linux-5.2.11/arch/arm64/boot/Image.gz /media/.../boot/Image.gz
in uEnv.txt:
KERNCOMPADDR=0x13000000
KERNUNCADDR=0x10000000
DEVTREEADDR=0x14000000
bootargs=...
bootcmd=ext4load mmc 1:1 $KERNCOMPADDR Image.gz; unzip $KERNCOMPADDR
$KERNUNCADDR; ext4load mmc 1:1 $DEVTREEADDR rk3399-rockpro64.dtb; booti
$KERNUNCADDR - $DEVTREEADDR
_______________________________________________
Community mailing list
[email protected]
http://lists.goldelico.com/mailman/listinfo.cgi/community
http://www.tinkerphones.org
