Hi David, cool! What I have just finished is a new RS232 console adapter for the Letux 400.
Unfortunately it works only on my (light green) sample device because the later ones are missing the 4 pin PicoBlade connector in the battery bay. It could be retrofitted but means opening the device and unfortunately the instructions on Kwaak are lost. I remember that it was quite tricky to deinstall the display hinge to get to the backside of the processor board. Anyways, if anyone needs such an adapter I could provide kits or assembled units. BR, Nikolaus > Am 01.06.2021 um 17:36 schrieb David Boddie <[email protected]>: > > The code I wrote to support simple microSD card reading on the Ben NanoNote > worked almost without modification on the Minibook. > > I seem to remember that I ran into complications on the NanoNote, but perhaps > the larger screen will be useful for diagnosing them. > > The repository can be found here: > https://gitlab.com/dboddie/inferno-os/-/tree/minibook > > David<Inferno-Letux-400-SD.jpg>_______________________________________________ > Community mailing list > [email protected] > http://lists.goldelico.com/mailman/listinfo.cgi/community > http://www.tinkerphones.org
_______________________________________________ Community mailing list [email protected] http://lists.goldelico.com/mailman/listinfo.cgi/community http://www.tinkerphones.org
