Hi, I am experimenting to get LetuxOS running on the Raspi-Zero-W. It already works on the Raspi-3B+ for long time and basically the setup should be cross-compatible.
I.e. it should be possible to swap the µSD card between both. At least it "simply works(TM)" with some Raspbian µSD - but not with my LetuxOS build. It turns out that kernel+device-tree are not being uncompressed and starting. What I could not yet find out is if the mainline kernel generally has a problem on Raspi-Zero (and needs patches not upstream). Or if my build process needs some tweaks because the 0W has subtle differences to the 3B+ which manifest during kernel uncompress (there was something like that with the Letux 400 where the built-in U-Boot can't uncompress a modern and big uImage). Another observation is that the device tree binaries are quite differently sized between Raspbian and the LetuxOS build - and can not be swapped. Does anyone on this list have experience with building and running mainline kernels for the Raspi-Zero? BR and thanks, Nikolaus _______________________________________________ Community mailing list [email protected] http://lists.goldelico.com/mailman/listinfo.cgi/community http://www.tinkerphones.org
