>My question is what would make those lines? >johnsn Any number of things.
What I would do: Try resoldering the connections on the 14 pin connector. I've seen a pin in that connector break where it couldn't be seen. So after resoldering it boot and wiggle it and see if that changes things. If no joy there then I would use soldering iron to warm up ICs one at time, starting with the video chips, to see if that changes things. Next I would fingerize it. By that I mean press finger on top of solder pads, without bending the board, repeating throughout the board. Sometimes that will localize problem. Gamba <http://home.earthlink.net/~gamba2> -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
